
Segment
Aluminium
Refractory solutions for primary production, remelting, recycling and casting.
Aluminium production runs hot, corrosive and around the clock. The furnace lining decides how long a campaign lasts, how much energy you burn and how often you stop for repairs.
Every melt attacks the lining. We select materials that resist the chemistry and temperature of each furnace, whether melting, holding, reverberatory or anode baking, so campaigns run longer and heat losses stay low.
Material selection, engineering, installation, maintenance and shutdown execution come from one supplier. Our teams work to your shutdown schedule, so the project finishes on time and production restarts without surprises.
Typical applications
- Melting furnaces
- Holding furnaces
- Anode baking furnaces
- Coreless induction furnaces
Applications in detail
Example applications
Melting furnaces

A melting furnace takes solid charge such as scrap, ingots or return metal and brings it to a clean, homogeneous melt. It is gas-fired or electrically heated, runs above 700 °C in the bath, and is charged and tapped again and again through the shift.
We match the working lining to the metal, fluxes and operating temperature. The right refractory limits metal penetration and makes planned relines more predictable.
Holding furnaces

A holding furnace keeps already molten metal at casting temperature between taps. Alloying, degassing and metering happen here, so a stable bath temperature matters more than melting speed.
Holding furnaces need a lining that maintains metal temperature through long operating cycles. We select refractory and insulation for the bath, walls and roof to limit heat loss and withstand repeated cleaning.
Anode baking furnaces

Anode baking furnaces fire green carbon anodes above 1100 °C until they are dense and conductive enough for the electrolysis cells. The anodes sit in packing coke inside long flue pits, and the furnace cycles between firing, cooling and reloading on a fixed schedule.
Flue walls and pits face repeated heating and cooling. We supply refractory materials for these zones and support installation and repairs during scheduled shutdowns.
Coreless induction furnaces

A coreless induction furnace melts and holds aluminium with an alternating magnetic field acting directly on the melt inside a crucible. There is no core and nothing moving in the metal: the field stirs the bath, evens out temperature and alloy, and the furnace is widely used in foundries for melting and alloying.
In a coreless induction furnace, the crucible lining separates the melt from the coil. We select the lining for the alloy and operating cycle, with attention to wear, thermal shock and safe changeovers.
Case film
Aluminium Husnes: case filmContact
AluminiumTalk to our aluminium team

Lars Aatlo
Area Manager Aluminium, Norway

Roger Kvam
Strategic Sales Executive

Christian Norberg
Project Manager
