The framework of the ash processor is a construction of 1.5mm steel sheet painted in the color RAL 7016. Alternative alternatives such as stainless offered separately. The ash processor has been equipped with heavy insulation to obtain the lowest possible noise level, estimated at around 50-55 dB.<\/p>\n\n\n\n
The standard version is factory-made by front doors in brushed stainless steel, SS2333. Alternative such as coated or copper are offered separately. To obtain such a clean and stylish exterior as possible, the sliding doors at the front fitted with concealed hinges.<\/p>\n\n\n\n
The grinding unit in the ash processor is based on the principle of chains as \u201dhits\u201d break the ash, which then falls down through a perforated plate and on down into the urn. Metal parts contained in the ash fall into the ash pan after completion of preparation. The ash processors control system consists of a PLC, which operated from a 5.7 \u201dtouch panel, mounted on the ash processors upper front door.<\/p>\n\n\n\n
Data<\/strong><\/p>\n\n\n\nElectrical
installation<\/td>400 V, 16 A<\/td><\/tr> Milling time<\/td> approximately 2 min<\/td><\/tr> Granuler size<\/td> < 3,5 mm<\/td><\/tr> Urn heights<\/td> approximately 200-350 mm<\/td><\/tr> Sound level<\/td> 50-55 dB<\/td><\/tr> Ventilation needs<\/td> approximately 300 m3\/h<\/td><\/tr> Weight<\/td> approximately 350 kg<\/td><\/tr> MeasureM\u00e5tt<\/td> h 1900 mm, b 1200 mm, d 645 mm<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n